|
Available in both 304 and 316L stainless steel, and in industrial and sanitary grades, Donaldson Process Filtration has the gas, steam or tank vent filter housing to meet your specific requirements.
|
R-EG/R-TF High Purity Filter System
The Ultrapure R-EG filter housing has been designed specifically for low flow applications of high purity gases such as those required by the semiconductor industry. When used in conjunction with our R-TF filter element, an absolute particle retention rate of 0.01 micron can be achieved.
|
|
P-EG Industrial Gas Filter Housing
For non-sterile industrial grade filtration of process air, gases or steam, the P-EG housing is available in 304 or 316L stainless steel with standard flow rates from 30 to 13,000 scfm (20 to 5,400 lbs./hr. steam), and with NPT or flanged connections.
|
|
PG-EG Sterile Air/Gas/Steam Filter Housing
For sterile filtration of air, gases or steam, the PG-EG housing is available in 304 or 316L stainless steel with standard flow rates from 30 to 13,000 scfm (20 to 5,400 lbs./hr. steam), and with Tri-clamp or flanged connections to maintain sterility. All PG-EG filter housings are 3-A certified for use in dairy applications.
|
|
PG-IL In-line Sterile Air/Gas Filter Housing
The PG-IL in-line sterile air/gas filter housing is an ideal choice for installations with limited space, and when very low pressure drop is required. PG-IL housings are available in both 304 and 316L stainless steel with standard flow rates 215 to 1,290 scfm. All are equipped with Tri-clamp connections.
|
|
P-BE Sterile Tank Vent Filter
For stationary or mobile tanks that require sterile filtration of ambient air entering the void space, and no restriction of air aspiration in either flow direction, the P-BE sterile tank vent filter will meet the requirement. The P-BE filter housing is available in 304 or 316L stainless steel, and is equipped with either Tri-clamp or flanged connections depending on size.
|
|
