Hydraulic FCK-LC Cartridge Assemblies

The FCK-LC is a strong and durable medium pressure in-line filter with aluminum alloy bowl and head. This assembly can installed as last chance filter to protect your critical equipment.

Features

• Operating pressure up to 60 bar / 870 psi
• Static pressure testing up to 60 bar  / 870 psi
• Collapse resistance up to 20 bar / 290 psi
• Flow rate range 30 lpm / 7.93 gpm

Benefits

• Designed to handle heavy-duty applications
• Compact unit

Applications

• Pilot control circuits

Available Media Types

• Stainless steel wire-mesh

This servicing information is provided as a best practices guide. It is not intended to replace or supersede the service instructions supplied by your engine or vehicle manufacturer.

Cartridge Servicing

1. Check the filter service indicator
   Check to see that the OEM specified service interval has been reached or that the service indicator shows that the filter is due for servicing.
   
   
2. Turn system power off and bleed pressure
   Ensure that the hydraulic system is turned off.
   Check that there is no pressure present.
   
   
3. Remove the housing cover
   
   
4. Remove the used filter, gasket and spring (if applicable)
   Properly dispose of the cartridge according to local regulations.
   
   
5. Clean the filter mount, cap and inside the housing
   Clean out any sediment from the inside of the filter housing.
   
   
6. Inspect the new filter cartridge for damage
   Check the new filter you will be installing for any shipping and handling damage. Do not install a damaged filter.
   
   
7. Lubricate the filter gasket with a thin layer of clean motor oil
   
   
8. Install new filter cartridge and spring (if applicable)
   Install filter into the housing.
   
   
9. Reinstall the housing cover
   
   
10. Bleed the system and check for leaks