This servicing information is provided as a best practices guide. It is not intended to replace or supersede the service instructions supplied by your engine or vehicle manufacturer.
Check the filter service indicator Check to see that the OEM specified service interval has been reached or that the service indicator shows that the filter is due for servicing.
Turn system off and release pressure Ensure that the hydraulic system is turned off.
Check that there is no pressure present.
Unscrew and remove the old filter and gasket Properly dispose of the used filter according to local regulations.
Wipe the filter head with a clean cloth
Inspect the new filter for damage Check the new filter you will be installing for any shipping and handling damage. Do not install a damaged filter.
Apply a thin film of motor oil to the gasket
Align threads – spin filter until gasket contact Fit the housing to the filter head as instructed on the housing.
Follow the icons on the filter to tighten Do not over-tighten.
Bleed the system and check for leaks
Donaldson Hydraulic Filtration Overview
Donaldson provides filters and contamination control products to protect hydraulic components – in the factory and on heavy-duty equipment.