Show Search Menu

Non-Adhesive Vents

Donaldson Non-Adhesive Protective Vents are designed to protect enclosures and devices from particles, water, oils, and other liquids without negatively affecting their operation. They are comprised of a filtration material that can be welded to a plastic housing or directly onto the device.

Features

  • High efficiency particulate removal
  • Venting of gases and pressure equalization
  • Eliminates the need for costly hermetic sealing
  • Repels water, oils, and other liquids
  • Oil ratings from 1 to 8
  • IP ratings from IP44 to IP67/IP68
  • Standard and custom sizes and shapes are available

Donaldson non-adhesive vents contain Donaldson's proprietary Tetratex® white or black ePTFE membrane, woven, nonwoven, and extruded materials such as nylon, polyester, polypropylene, and polyester/polyethylene.

  • Hydrophobic, oleophobic, and acoustic materials are available
  • Thickness: < 0.3 mm / < 0.012 in
  • Continuous operating temperature range: -40° to 149° C / -40° to 300° F
  • Minimum efficiency of 99.97% on 0.1 μm particles
  • Material data sheets available upon request

Handling Instructions

  • Wear gloves or use rounded tweezers when handling the vents
  • Mounting surfaces should be clean and free of oils, particles, and other contaminants
  • Vents should be mounted on flat, vertical surfaces where liquids or other contaminants will not pool
  • Follow dispenser instructions when using an automated vent dispenser
  • For manual vent dispensing, roll the liner under the vent until the vent extends beyond the liner and becomes easily accessible
  • Do not pry the vent from the liner or fold the vent, as this could damage the vent

Assembly Instructions

  • Accurate placement of the vents can be improved by using markings, a recessed area, or a target area in which the vent is centered over the vent hole in the device or housing