Hydraulic TT15/30/60 In-Tank Assemblies

TT15/30/60 Tank Top filters are designed for industrial service. Durable construction with aluminum casting and Buna-N® seals standard. Used with mineral and synthetic based fluids, these return filters conveniently mount to tank tops.

Features

• Strong, durable construction with aluminum casting and nitrile seals
• Common holes used to mount filter head to reservoir without welding
• Down pipe attached to threaded port and gasket surface for a watertight seal
• Each filter provides a new by-pass valve and anti-drainback valve for easy filter change
• Working pressure to: 6.9 bar / 100 psi
• Flow range to: 189 lpm / 50 gpm
• Porting size options: ¾ in., 1-½ in. NPT
• Standard bypass rating: 1.5 bar / 22 psi
• Rated static burst to: 17.2 bar / 250 psi

Benefits

• Used with mineral and synthetic based fluids
• Conveniently mount to tank tops with four screws for easy access and service
• Each filter provides a new by-pass valve and anti-drainback valve for easy filter change

Applications

• In-plant systems
• Mobile equipment
• Return lines

Available Media Type

• Natural fiber cellulose
• Available in two efficiency grades

This servicing information is provided as a best practices guide. It is not intended to replace or supersede the service instructions supplied by your engine or vehicle manufacturer.

Spin-On Filter Servicing

1. Check the filter service indicator
   Check to see that the OEM specified service interval has been reached or that the service indicator shows that the filter is due for servicing.
   
   
2. Turn system off and release pressure
   Ensure that the hydraulic system is turned off.
   Check that there is no pressure present.
   
   
3. Unscrew and remove the old filter and gasket
   Properly dispose of the used filter according to local regulations.
    
4. Wipe the filter head with a clean cloth
   
   
5. Inspect the new filter for damage
   Check the new filter you will be installing for any shipping and handling damage. Do not install a damaged filter.
   
   
6. Lubricate threads
   
   
7. Apply a thin film of motor oil to the gasket
   
   
8. Align threads – spin filter until gasket contact
   Fit the housing to the filter head as instructed on the housing.
   
   
9. Follow the icons on the filter to tighten
   Do not over-tighten.
   
   
10. Bleed the system and check for leaks