Overview
SP80/90 double filter head allows for double the flow capacity, with two filters to hold more contaminant. Aluminum casting and nitrile seals are standard. SP80/90 filters are interchangeable with SP50/60 filters.
Features
- Double filter head
- Strong, durable construction with aluminum casting and nitrile seals
- Filters ship with a 3-seal kit containing "L", square, and o-ring gaskets
- Working pressure to: 10.3 bar / 150 psi
- Rated static burst to: 17.2 bar / 250 psi
- Flow range to: 379 lpm / 100 gpm
- Porting size options:
- 1-¼ in. NPT
- SAE-24 o-ring
- 2 in. SAE 4-bolt flange code 61
- Bypass ratings of:
- 1.72 bar / 25 psi
- 1.34 bar / 15 psi
- 0.34 bar / 5 psi
- No bypass
Benefits
- Double the flow capacity
- Greater contaminant capacity
- Interchangeable with SP50/60 filters for added versatility
Applications
- Fluid conditioning systems
- In-plant systems
- Mobile equipment
- Power transmissions
- Process systems
Available Media Types
- Donaldson exclusive Synteq™ – synthetic fiber media for greater filtration efficiency and higher dust-holding capacity
- Natural fiber cellulose
- Stainless steel wire mesh
- Water absorbing media
- Many different efficiency grades from which to choose.
Resources
Service
This servicing information is provided as a best practices guide. It is not intended to replace or supersede the service instructions supplied by your engine or vehicle manufacturer.
Close
Spin-On Filter Servicing
- Check the filter service indicator
Check to see that the OEM specified service interval has been reached or that the service indicator shows that the filter is due for servicing.
- Turn system off and release pressure
Ensure that the hydraulic system is turned off.
Check that there is no pressure present.
- Unscrew and remove the old filter and gasket
Properly dispose of the used filter according to local regulations.
- Wipe the filter head with a clean cloth
- Inspect the new filter for damage
Check the new filter you will be installing for any shipping and handling damage. Do not install a damaged filter.
- Lubricate threads
- Apply a thin film of motor oil to the gasket
- Align threads – spin filter until gasket contact
Fit the housing to the filter head as instructed on the housing.
- Follow the icons on the filter to tighten
Do not over-tighten.
- Bleed the system and check for leaks
Videos
Donaldson Hydraulic Filtration Overview
Donaldson provides filters and contamination control products to protect hydraulic components – in the factory and on heavy-duty equipment.
Close
Close
