Overview
Donaldson's Snap-Fit enclosure protection vents provide protection from dust, dirt, water, oils, and liquids while allowing pressure equalization.
The durable vent is available in two sizes – standard and low profile – and is easily integrated into existing equipment.
Snap-Fit vents can be used in a variety of automotive applications such as sensors, ECU's, and lighting as well as protective cases, lighting enclosures, appliances and general enclosures.
Features
Key Features & Benefits
- Robust design provides maximum protection from harsh environments
- Hydrophobic vents meet water repellency ratings up to IP69K
- Oleophobic vent meet oil repellency ratings up to 8 per AATCC Spec 118-1992
- Provides dust and liquid protection while equalizing pressure
- Snap-Fit design integrates easily into your device for quick assembly
- Secure vent cap design will not separate from the body during installation or application
- Durable automotive-grade glass-filled PBT plastic provides strength and resistance to harsh environments
Test Specification
- ISO 9227:2012: Salt Spray Resistance - 100 hours at elevated temperature and pressure
- MIL-STD-202G: Mechanical Vibration - Fatigue resistance
- IEC 60529-2013: Environmental Protection - IP rating
- Temperature Resistance: -40° C to 125° or 150° C / -40° F to 257° or 302° F, 20 cycle, 10 day test
Handling & Specification
- Clean mounting surface and area where Snap-Fit vent will be installed to remove any contamination. Allow surface to dry after cleaning.
- Ideal location for installation is on a flat, vertical surface on an exterior housing wall. This location will prevent any liquids from collecting.
- Chamfer recommended for optimal O-Ring seal when wall thickness is suitable.
- Push Snap-Fit vent in until you hear a click. This will ensure proper seal.
Snap-Fit Vent
| Part # | Typical Airflow @ 70 mbar | Minimum Water Entry Pressure (mbar @ 45 sec.) | Temp. Rating | IP Rating |
Oleo-phobic | O-ring | ||
|---|---|---|---|---|---|---|---|---|
| 67 | 68 | 69K | ||||||
| P515708 | 250 mL/min (8 oz/min) |
1,100 | -40° to 125° C (-40° to 257° F) |
X | X | X | Yes | EPDM |
| P516447 | 2,160 mL/min (73 oz/min) |
280 | -40° to 125° C (-40° to 257° F) |
X | X | X | Yes | EPDM |
| P516450 | 2,400 mL/min (81 oz/min) |
320 | -40° to 150° C (-40° to 302° F) |
X | X | X | No | Silicone |
| P516391 | 250 mL/min (8 oz/min) |
1,100 | -40° to 150° C (-40° to 302° F) |
X | X | X | Yes | Silicone |
Low-Profile Snap-Fit Vent
| Part # | Typical Airflow @ 70 mbar | Minimum Water Entry Pressure (mbar @45 sec.) | Temp. Rating | IP Rating | Oleo-phobic | O-ring | ||
|---|---|---|---|---|---|---|---|---|
| 67 | 68 | 69K | ||||||
| P515955 | 250 mL/min (8 oz/min) |
1,100 | -40° to 150° C (-40° to 302° F) |
X | X | X | Yes | Silicone |
Applications
Automotive
- Motors & pumps
- ECUs
- SCR
- Battery packs
- Sensors
- Powertrain
Electronics
- Air quality sensors
- Outdoor lighting
- Telecommunications
- Outdoor electronics
Resources
Articles
Close
